To guarantee the maximum life of the stamp ink cartridge it is important to keep it stored in the airtight bag that comes with the stamp. Before using the stamp for the first time, open the cartridge lid and insert it into your stamp through the opening in the back. Place the cartridge inside the stamp with the ink-side down and push in until it clicks into place.

Before the first use, insure that the stamp is well inked by only pressing the stamp half-way down. Once the Stamp is inked, place the Stamp on a smooth, flat surface and push the stamp all the way down. After using the stamp remember to remove the cartridge, put on its lid and store it along with the stamping the airtight bag.

Stikets®️ custom stamps are the quickest and most reliable solution for marking fabric or paper surfaces. The stamps are produced in high-quality material, they're climate neutral and they use non-toxic paint. They also have an innovative automatic self-inking and ink refill system, ensuring that handling the product is easier, cleaner and more user-friendly.

• 100% Customisable
• Automatic and self-inking
• Intuitive and clean handling
• Non-toxic and climate-neutral ink
• Includes ink for up to 1000 markings
• More than 150 icons, 11 fonts and 20 backgrounds to choose from
• Made in Europe

100% customised and ready to use

The stamp comes with a customised rubber plate. This means that it can be used without needing to stamp individual letters, thus saving time and improving precision. Customisation is achieved through a manufacture process based on high-precision laser technology. The user receives their stamp customised and ready to use.

Easy to use for marking and identifying property

The upper part of the self-inking stamp has a clear top, making it easy to see what the stamp looks like. This U-shaped piece is extractable and connects to the front and back of the stamp via lateral ribbing located on the upper sides. The clear box on the bottom of the stamp enables the user to position the stamp precisely to ensure the final print is clear and legible.

Maximum ergonomics and precision

Stikets®️ custom stamps have non-slip grips on both sides to stop the user's fingers from slipping down when operating the stamp. Placing fingers on the non-slip grips has four advantages: (1) It allows the user to have complete control of the stamp; (2) it avoids making sharp movements when applying the stamp, preventing the finished print from being blurry; (3) it allows the stamp to be applied evenly on any surface; (4) it ensures the finished print is completely legible each time it is applied.

Intuitive and clean handling

The ink pad has holding tabs on each end to position the stamp and immobilise it inside the stamp device. Once the ink pad is inserted in the stamp, the holding tabs keep the ink pad in a fixed position to prevent it from moving out of place inside the self-inking stamp. The same holding pad system allows the user to remove the ink pad from the stamp. Simply press down on the holding pads and use fingers to slide the ink pad out. The system is cleaner than others as the user's fingers never come into contact with the inky part of the ink pad.

Automatic with a safety lock

Stikets®️ custom stamps have a two-position safety lock on their rear to enable easy handling. The safety lock is used to immobilise the lower feedback mechanism when changing the ink pad. This prevents the surface of the plate or the printing rubber from touching the ink pad, once the stamp has been used and the user wants to put it away.

Features an eco-label

Stikets®️ custom stamps feature an eco-label in recognition of the low environmental impact of the materials used for their manufacture. The eco-label also recognises the fact that they include a non-toxic, water-based ink cartridge. This ensures the product is completely safe to use and has no detrimental effect on people's health or on sensitive skin.

Even marking

The stamp's ink pad comprises two layers of special fabric. The first layer is composed of an ultra-fine filtering fabric that spreads the ink over the printing plate. This layer enables an exact quantity of ink to go through the fabric so that ink is applied to the stamp evenly. The second layer, in the bottom of the ink pad, is porous and is used to collect the ink. The second fabric has low permeability, which means that it preserves the functional integrity of the ink and the life cycle of the product.

High density rubber for maximum definition

The stamp is produced by customising a high-density rubber sheet. This piece can come in various sizes, and it is fixed on the stamp during the production process. Applying the stamp consists of three steps: 1. The user activates the stamp automatically. 2. The printing plate, which is touching the ink pad, rotates on its own axis due to the feedback mechanism. 3. The rubber comes into contact with the surface the stamp will be used on to mark belongings as personal property.

Stikets®️ personalized stamps are a very practical and quick solution for marking clothes and objects. In order to be able to properly label black or dark clothes, we recommend Stikets iron-on labels. You can choose the colour that you prefer and they are visible on garments of any colour.

Stikets iron-on labels are ironed in seconds. Simply iron at maximum temperature and without steam until the label is integrated into the fabric. It is important to iron until the texture of the fabric can be perceived when rubbing the finger over the label. This is when the label has been properly applied and becomes permanent, resisting the washer and the dryer.

The payment of your orders is done in a simple, fast and secure way. Orders made at www.stikets.co.uk can be paid for by credit card or via PayPal.